SCMMAN1+1/158
COD. SCMMAN1+1/158
![SCMMAN1+1/158](https://rvrusa.com/media/page8/270/image/scmman11_158.png)
Manual changeover function across main and spare transmitter by coaxial relay control panel.
FEATURES
PRIMARY APPLICATION: manual changeover function across main and spare transmitter by coaxial relay control panel.
HARDWARE FEATURES: the changeover system is housed in panel rack having the dimension of 2 HE.
USER-FRIENDLY FEATURES: the front panel features many leds that indicate instant system status to the operator. It is possible to control and vary any system setting through simple buttons.
EASE OF MANTENANCE: the changeover system is assembled using modules and boards with connectors so that it is easy to remove, replace and add modules and boards.
INTERFACE CONTROL: the rear panel features all connectors that could be used to connect the equipment to other components and for piloting through remote commands and signals.
The image of this layout is purely demonstrative and may change without notice.
PRIMARY APPLICATION: manual changeover function across main and spare transmitter by coaxial relay control panel.
HARDWARE FEATURES: the changeover system is housed in panel rack having the dimension of 2 HE.
USER-FRIENDLY FEATURES: the front panel features many leds that indicate instant system status to the operator. It is possible to control and vary any system setting through simple buttons.
EASE OF MANTENANCE: the changeover system is assembled using modules and boards with connectors so that it is easy to remove, replace and add modules and boards.
INTERFACE CONTROL: the rear panel features all connectors that could be used to connect the equipment to other components and for piloting through remote commands and signals.
SCMMAN1+1/158 | ||||
Parameter | U.M. | Value | Notes | |
GENERALS | ||||
Ambient working temperature | -10 °C to + 50 °C / 95% | Relative humidity non condensing | ||
POWER REQUIREMENTS | ||||
AC Power input | AC Supply Voltage | 115 - 230 VAC ±15% | ||
Active Power Consumption | W | 2 | ||
Connector | Terminal Block (L-N-PE) | |||
MECHANICAL DIMENSIONS | ||||
Phisical dimensions | L x H x W | mm / inch | 483 / 19 | EIA Rack |
mm / inch | 88 3 1/2 | 2HE | ||
Weight | kg | About 0,3 | ||
Cooling | Convection cooling | |||
Acoustic noise | dBA | 0 | ||
AUDIO INPUTS | ||||
Digital | Command Switch relay | Terminal Block | ||
OUTPUTS | ||||
Digital | Position Relay | Terminal Block | ||
Digital | Out of Position Relay | Terminal Block | ||
INTERFACES | ||||
Signalling LEDs / Synoptical | LOCAL | mm | Yellow 5 | |
TX1 to ANT | mm | 2 x Green 5 | ||
TX2 to ANT | mm | 2 x Yellow 5 | ||
Push button | LOCAL ENABLE | Used for enabling change whith push button | ||
TX1 to ANT | Used for change Relay in a POS1 | |||
TX2 to ANT | Used for change Relay in a POS2 | |||
FUSES | ||||
On mains | 1 Fuse 125mA - 5X20 mm | |||
On services | X | |||
On PA Supply | X | |||
On driver supply | X |
The image of this layout is purely demonstrative and may change without notice.